Universal banner
Your current location : Home >> News >> Technical Information

ContactContact Us

Ningbo Anchuang Electronic Technology Co.

Mobile:13567474719 

               Manager Hu

Landline:0574-88857636

Website:  en.alouc-industry.com 

Address: No.666 Zhongxing East Road, Xikou Town, Fenghua District, Ningbo


Analysis of high pressure fuel pump manufacturers: high-pressure fuel pumps are necessary for high-rpm engines

2022-01-14 17:36:56
a

    These high pressure pumps are required for high speed engines. If you are running a supercar at 7,000rpm, the injectors must be 70psi and for some pumps you can change the pressure relief to increase or decrease the pressure. High pressure, high volume petrol pumps have a high pressure, high volume pump in addition to a very large gear shaft and a hard bypass valve. This type of Land Rover high pressure fuel pump is only available for Supercar engines. The engine is built into many different Peugeot digital models of large vans. Oil is the engine cornerstone and the injection pump is its cardio-vascular disease promoting the big guys to have a lot of pressure and the oil pump high pressure oil pump injects a lot of the exact location which counts to make the engine operate and cause. For the petrol pump, the very best choice for your unique engine depends on several prerequisites. The range of application of the engine is the main factor that must be fully considered.


    High-pressure oil pumps are essential for high-speed rotary car engines


    Most hot rod machines can be used with the usual ground screw fixing, out of the box petrol pumps are more limited and are defined by 2 important factors: pressure and flow. They generally give the engine more pressure, higher pressure and higher flow rates. Overwhelmingly, the flow rate is determined by the remaining oil management that the pump can move. Improving the safe passage of the spur gear shaft, the physical specifications of the inlet and outlet and the spur gear shaft (in a conventional gear oil pump) or the motor (in a gear shaft motor scheme design) will allow the high temperature and high pressure oil pump to move a lot of oil. The export pressure of the pump is limited by the poppet. Naturally, the yolk capacity is adjustable and the pressure can be regulated by adjusting the current capacity on the yolk or by changing the yolk according to the ultra-high pressure electric oil pump. The pump directs the working pressure to the poppet until the bypass valve is pulled down, which does not allow the pressure to rise further. However, if the size of the bypass valve is restricted, the pressure can be increased more.



The label

Recent View:

Copyright © Ningbo Anchuang Electronic Technology Co. record number:浙ICP备19028214号-2
中文 | Sitemap | RSS | XML service support:HQLF